This is our journal of what we pray is our sojourn of life (Hebrews 11:8-10) along the narrow way (Matthew 7:14), even the old paths (Jeremiah 6:16), submitting to the Bible as a light unto both (Psalms 119:105). It is our prayer that these documented moments in our earthly time benefit whom God might choose to edify, but ultimately that God glorifies Himself through them.
After a couple of years since we started putting insulation in the attic, and after last year laying down 6-8 feet insulation “fingers” coming out from the ends to plug up the gaps between the wall frames and ceiling panels, we’ve recently been able to finish laying down all of the insulation! Hopefully this will make a big difference in being able to maintain heat in the house.
My hope was to have this ready for winter, and the Lord graciously granted that it would be. Thanks to Him, and for those who help to make continued progress on the house possible!
That time of year rolled around to where any pecans that were growing were starting to break forth from the green shells in which they grow on the trees. One of our trees has some, but something appeared to get to them as the pecans were eaten out. But the other tree that had pecans was okay, and so it was time to gather them in!
Here are some of them on the tree:
And then the 2015 haul!
We are always very grateful to the Lord for the least grain of food He provides, as each one is a miracle of providence from Him!
One day when bringing up the YouTube main page, there was a video thumbnail displayed with the title something about unlimited fuel for fires, and showed a bucket. Intrigued, I clicked on it, and it ended up being about a fellow who came up with an inexpensive way to press paper into burnable bricks using Home Depot buckets!
Here’s his video:
Nice! Simple and inexpensive…right up my alley! With all of the feed bags we have, I thought I’d give this a go!
Here’s the drilled out bucket:
Then drawing the pressing block on a left-over piece of 2×12:
And the circle drawn:
Then being cut:
And finally cut out:
After putting the drilled out bucket in another bucket, I added water and paper. We’ve been tearing up the feed bags, along with snail-mail waste, and old doctrinally-incorrect books we’ve had laying around 🙂 I’ve been letting it sit all day and over night:
I didn’t think I could make the saw blade device he made, but found a left-over broken goat lead tether we had laying around:
And using that, it actually works pretty well to mulch up the paper:
Here the drilled-out bucket is stacked on the other bucket ready for pressing:
And here the pressing block is set:
Then a third bucket is set on that, and here, in first attempts, a cinder block to try to get it started:
And then me laying on the cinder block:
And here’s the result when I tried to sit on that. Oops 🙂 :
But, coming up with a better way, I put a board across the pressing bucket, and am able to sit on it now no problem:
And then, I tried putting a couple of feed bags on top, which frees me up for most of the pressing process — I just come back later and sit on it a bit to finish it off:
And here’s the result!
They fit nicely on the bucket lids, so here are several drying in the sun:
And several finished ones:
The only thing left is to try them once we get to where we’re using the wood burner this winter. It’ll be fun and interesting to see how they work!
Hopefully they will, and we’re thankful to the Lord for granting this idea to maybe be able to use some of the extra resources we have for good use!
One afternoon, I was looking east out toward our chicken pen area and saw a hen with some little birds around her. My first thought was that some small wild birds were just hanging around her, but then thought, “Wait a minute….I wonder….” And sure enough, it was a mama hen with three little chicks in tow!
It always amazes me how a hen makes it out in the woods for three weeks sitting on eggs with hazardous critters running around to end up hatching some out. God knows though. 🙂
And so, we rounded them up and put them in the piano room, and they’re all three still healthy today!
Here they are:
And their video:
We are grateful to the Lord for granting this bonus hatching, His watchful eye on them the three weeks in the wild, and His continued granting of their health and safety!
To be able to make things a little more functional for living in the house, we’ve started to put up internal siding in the kitchen area. I really like the T-111 siding we used for the ceiling, with its kind of old-timey wood look, so we are going with that for the internal siding as well.
We have a helper for house projects now too, and here Robert is putting up some of the siding:
And here is the rest of it for the kitchen area:
Robert did a good job, and to me it looks nice!
Here’s a firewood rack we picked up too, to try to be a little more tidy with the firewood:
We are thankful to the Lord God for the provisions to continue on the house!
After getting some more permanent fencing around our main orchard area, it was time to starting putting up some around our pecan trees. The hand-pulled method has worked ok, but sometimes the goats still get in them, and recently one of our pecan trees was completely barked by a goat from top to bottom. Bummer.
For this new fencing, I decided for expediency to just use t-post corners, even though they didn’t work well on long fence lines, figuring these were going to have much less pull on them.
Here is one pecan tree before starting, with just the hand-pulled fencing around it:
After putting in t-posts, it was necessary to sometimes twist them to align better with a fence line or otherwise, so a pipe wrench works great for that:
Here is one corner done. After facing the corner t-posts outward on a couple of the other pecan areas, I realized the corner bracket pieces are designed to work more properly facing the t-posts inward:
Here is another corner done:
And all t-posts in place:
Then, it was time to pull the fencing. I decided to pull two directions: one out away from the goat field fence, around the corner, and then perpendicular to the field fencing; and then the other, to close off the last side away from the field fence. Going around the one corner worked ok if I tightened tension on the fencing a little at a time and moved the fencing around the corner after each time of tightening:
As before, the truck is used to help pull the fencing:
And here it is pulling:
And here is all the fencing complete!
Lastly, I put down about an 8 inch layer of mulch:
We are grateful to the Lord for granting the growth of the pecan trees, even some from the roots (this one pictured I believe was one of those), and for Him granting provision to be able to continue work on the homestead!
In our previous root cellar/storm shelter episode, we added a concrete footer slab all the way around the east side. This worked pretty well, keeping the majority of water out. However, with rain usually coming in from north and west, and there still being some leaking, we needed to do the north side as well (the west side currently has flashing attached to the root cellar wall acting as a footer).
I requested this past Wednesday, our monthly community work day, for the fellows to help with pouring the concrete. In preparation, I dug out the footer, which was 1 foot out, 4 inches deep, and then another 4-6 inches out, 8 inches deep as a trench. I had to start around the previous east footer because I had dug out that trench all the way to the root cellar wall, which wasn’t correct, since water in the trench could just flow up to the root cellar wall and then down it, which defeated the purpose of the trench.
Foreman William apparently had to approve:
I put in some concrete anchor bolts to try to help join the new concrete with the old, spaced about 2 feet apart:
And added re-mesh, tying it to the anchor bolts and elevating it off the ground with rocks:
Then it was time for work day and the pour:
We mixed in some dirt into the concrete to try to help it go a little farther:
And here it is all done! It was about 25 feet long, and the guys banged it out in about two hours, 32 bags of 80 pound Quickrete. It seems to be holding ok at this time — I had to spray it down with water all afternoon because even in the shade, it was drying too fast and starting to show cracks:
Since we finished the whole footer in the morning, the guys came back after lunch break and helped with painting a few items around the homestead:
The ladies did some painting in the morning, along with some preparation on preserving our garden pumpkins, and in the afternoon, Sue continued to work on the pumpkins for final processing, and the ladies worked on sewing:
And then at the end of community work day, we had our customary taco meal together!
Here are the pumpkins cut up, and the meat and juice preserved:
And the seeds drying on the solar food dehydrator:
Thanks again to everyone here for their help on work day! And we are thankful to the Lord for allowing us to be able to work together — we pray He glorifies Himself through these things. And we are thankful to Him for continued progress on the homestead.
Heb. 11:8-10 - "By faith Abraham, when he was called to go out into a place which he should after receive for an inheritance, obeyed; and he went out, not knowing whither he went. By faith he sojourned in the land of promise, as in a strange country, dwelling in tabernacles with Isaac and Jacob, the heirs with him of the same promise: For he looked for a city which hath foundations, whose builder and maker is God."
Receive New Blog Posts by Email
We will never share your information nor solicit you.
